solid film

Solid Film Lubricant Used in Aircraft

飞机用固体膜润滑剂

CL-60 Air drying resin , bonded , solid film lubricant .

空气干化树脂，粘合的，固体膜润滑剂。

Research on Radiation Heat Transfer through Solid Film of Mold Fluxes

通过保护渣固态渣膜的红外辐射传热研究初探

Analysis and calculation on the surface temperature of Solid Film Lubricated gears

固体膜润滑齿轮表面温度的分析与计算

A Study of Ultra Thin Solid Film by Surface Enhanced Raman Spectroscopy

超薄固体膜的表面增强拉曼光谱研究

The solid film formed provides high density , high mechanical strength and high apparent viscosity .

固态膜致密性强、机械强度高、表面粘度大。

Application of Solid Film Lubricant on Spacecraft Mechanism

固体膜润滑剂在飞船机构中的应用研究

Tribological Behavior of Three Bonded Solid Film Lubricants at Air and Different Vacuum

三种有机粘结固体润滑涂层的真空摩擦磨损性能研究

Fracture of the Solid Film in Thin Solid Film - Liquid Film-Substrate Structure

固体-液体-基底结构中裂纹形貌形成机制

Properties Research of Solid Film Lubricant for Preventing Titanium Alloy From Fretting Wear

用于钛合金防微动磨损的干膜润滑剂性能研究

The Friction and Wear Characteristics of the Solid Film Lubricant and Its Function in the Oil

固体润滑涂层在干摩擦及有油条件下的摩擦磨损性能

A Reflection Interference Method for Determining Optical Constants and Thickness of a Thin Solid Film

反射干涉光谱法测量固体薄膜的光学常数和厚度

Preparing thin solid film on the metal surface is one of the important methods to improve the metal properties .

在金属表面加工薄膜层是提高材料性能的重要途径之一。

Experimental Study on Anti-creeping Property of Solid Film Lubricants

固体润滑膜防爬性能试验研究

A Combination Method for the Determination of Inorganic Lubricating Components in Spray Agents of Solid Film Lubricants

干膜喷剂中无机润滑组分的综合分析方法

This paper study and analysis microelectronic solid film construction and factor that effect the film resistor conductivity and constantity .

本文对微电子固体薄膜结构，以及影响薄膜电阻导电性和稳定性的因素进行了研究和分析。

It is a clear transparent solid film , but it becomes blue after irradiated by γ - ray .

这种辐射变色膜为无色透明固体薄膜，经60Coγ射线辐照后，其颜色变为蓝色。

Study of the Influence of Lanthanum Fluoride on the Tribological Properties of Bonded Solid Film Lubricants and its Mechanism of Function

氟化镧对固体润滑粘结膜摩擦学性能的影响及其作用机理之研究

Thus the present work provides a theoretical basis concerning the temperature effects in designing the adhesion resistance of gears lubricated through solid film .

从而为固体膜润滑齿轮抗胶合能力的设计从温度方面提出了理论依据。

The resistance values of alkylation process are in the following order : gas - liquid film > liquid - solid film > internal diffusion and reaction .

固定床鼓泡反应器中烷基化反应过程阻力的大小顺序为：气液膜阻力>液固膜阻力>内扩散阻力与化学反应阻力之和。

The maximum photoluminescence peaks of the copolymer in a chloroform and a solid film were 470 nm and 505 nm , respectively .

其氯仿溶液和固体膜的最大光致发光波长分别处于470nm，505nm。

The research emphasis and the latest advance of stress study in thin films are reviewed , and the dominant direction of the study of thin solid film stress is discussed .

综述了近几年薄膜应力研究的重点及新进展，探讨了薄膜应力研究的发展方向。

The difference between PL spectra of TMEP solution and PL spectra of TMEP solid film confirms the formation of excimer .

激基缔合物的形成从TMEP在薄膜状态下与溶液状态下的荧光光谱的比较中得到证实。

As the materials are commonly used as thin solid film in real world applications for making photonic devices , so , importance of photoluminescence properties in solid state is discussed .

由于材料通常是以固体薄膜应用于光电器件，因此，我们对材料的固态的发光特性重点进行了讨论。

A laminar structure combined by solid film , liquid layer and rigid substrate from top to bottom was investigated . A unsteady liquid layer model is considered for calculation .

考虑液体层较薄的情况下液体膜/基底间界面不平整对结构的稳定性，特别是固体薄膜稳定时的褶皱变形产生的影响。

The UV-vis absorption in solution and solid film , fluorescence and stability of styryl-4-pyridine cyanine - β - cyclodextrin dyes were studied .

研究了苯乙烯基-4-吡啶菁-β-环糊精染料在溶液中及固体薄膜中的紫外可见吸收性质、荧光性质和相对稳定性。

Two kinds of solid film lubricant , HR-7201 and HR-7101 , were prepared to fit new aircraft . Solid film lubricant was made by home-made materials .

针对新机种对固体膜润滑剂的需求，研制了两种固体膜润滑剂-HR-7201和HR-7101。

On the base of preparing rear earth ethyl salt . We obtained doped rear earth ion solid film sample of PMMA and we also tested it 's absorption curve .

在制备稀土辛酸盐的基础上，得到了掺杂稀土离子的聚甲基丙烯酸甲酯（PMMA）固体薄膜试样，测得固体薄膜试样的吸收曲线。

Two kinds of solid film lubricant was studied to meet the requirements of spacecraft mechanism , One named BJ using in outside spacecraft and the other named GYM-8 using in inside .

针对空间飞行器对固体膜润滑剂的需求，研制了两种飞船机构上应用的固体膜润滑剂，分为舱外机构使用的BJ干膜润滑剂和舱内机构使用的GYM-8干膜润滑剂两类。

In order to ensure that the film will be in a solid film in quality , the determination of drying time is very important in inspect of the mechanical and physical performance of the paints .

涂膜的干燥往往需要一定的时间，才能保证最终形成固体涂膜的质量，因而干燥时间的测定是涂料常规性物理检验的一个重要方面。